Damp-Proof Membrane - Concrete.

Friday, December 10, 2010

Concrete is spread oversite as a solid base for floors and as a barrier to moisture rising from the ground.

Concrete is to some degree permeable to water and will absorb moisture from the ground; a damp oversite concrete slab will be cold and draw appreciable heat from rooms.

A requirement of the Building Regulations is that floors shall adequately resist the passage of moisture to the inside of the building. As concrete is permeable to moisture, it is generally necessary to use a damp-proof membrane under, in or on top of ground supported floor slabs as an effective barrier to moisture rising from the ground. The membrane should be continuous with the damp-proof course in walls, as a barrier to moisture rising between the edges of the concrete slab and walls.

A damp-proof membrane should be impermeable to water in either liquid or vapour form and be tough enough to withstand possible damage during the laying of screeds, concrete or floor finishes. The damp-proof membrane may be on top, sandwiched in or under the concrete slab.

Being impermeable to water the membrane will delay the drying out of wet concrete to ground if it is under the concrete, and of screeds to concrete if it is on top of the concrete.

Related Posts by Category:

3 comentarios:

Unknown said...

Great information you have shared here, through this post. Thanks and keep sharing such valuable updates through your side.

Screeding Service in Dubai

awcindia said...

Thanks for sharing nice blog.
waterproofing services in mumbai

It is good article post thanks for sharing.

construction companies oxford
building companies in oxford
construction companies in oxfordshire

Post a Comment