Hot pitch or bitumen.

Thursday, December 16, 2010

A continuous layer of hot applied coal-tar pitch or soft bitumen is poured on the surface and spread to a thickness of not Less than 3 mm. In dry weather a concrete blinding layer is ready for the membrane 3 days after placing. The surface of the concrete should be brushed to remove dust and primed with a solution of coal-tar pitch or bitumen solution or emulsion. The pitch is heated to 35°C to 45°C and bitumen to 50°C to 55°C.

Properly applied pitch or bitumen layers serve as an effective damp-proof membrane both horizontally and spread up inside wall faces to unite with dpes in walls and require less patient application than plastic sheet materials.

Related Posts by Category:




2 comentarios:

Highway said...

Nice blog post If you are searching for the quality Adhesion Agent Bitumen modifier for improving the adhesion of bitumen to wet aggregate or chip.Bitubind works as an adhesion agent in asphalt to improve the bond between stone and bitumen to create stronger more durable asphalt mixes. It has been used in New Zealand for the last 4 years by many contractors from Southland to Northland.

Social Media said...

The Blog article very surprised to me! Your writing is good. In this I learned a lot! Thank You! Bitumend Rejuvenate penetrates into the asphalt leaving behind polymers that strengthen and add life to the bitumen.

Post a Comment

 
 
 

Labels