Flashings - Exterior Wall Assembly

Saturday, October 28, 2017

There’s an old saying that fits this topic very well: the devil is in the details.  at’s because it’s how we  ash windows, doors, porches, chimneys and other key areas of the exterior walls and roof that will keep the water out of your home. Flashings are one of the most important and overlooked components of the building envelope that make or break long-term resistance to damage. Make certain that your framers and roofers are using the right materials for the job and installing them in the proper fashion.  is is not the place to cut money from your budget! Flashings of all sorts are manufactured to  t every joint and intersection of your exterior building envelope, to cover all the different angles, seams, gaps and penetrations. It’s not just the materials; even more importantly, how they are installed keeps the water running downhill.

With windows, the process begins with a sill pan or a layer of waterproof material covering the bottom of the rough opening that the window will be installed in.  is material should be turned up at the corners at least six inches on the inside of the studs and then extend out on top of (not under) the house wrap below the open- ing. The house wrap has a  wrap cut above the window. The window is then installed, and the sides are  flashed with an adhesive tape, followed by a layer of  flashing tape across the top of the window  flange. The  flap of house wrap is then brought down over the top  flange, and it is taped in place with  flashing tape.  The bottom  flange of the window is not flashed.  is will allow any water that does get into the opening to drain out and  ow down the waterproof drainage plane of the house and out the weep holes or screed at the bottom of the wall. By the way, the order that these flashings are installed, from the bottom up, is critical. For curved windows and doors there are flexible flashing tapes on the market now that work very well.


The process for porches and decks is much the same.  e drain- age plane material is fully installed before the ledger board is put in place. A er attaching the ledger board, the drainage plane is cut above the ledger board to which the joists will be attached. A  ash- ing material like metal or  flexible waterproofing is attached to the sheathing, and wrapped around the front of the ledger board.  e drainage plane is then turned down over this flashing and taped in place. You can obtain detailed drawings showing exactly how these openings need to be flashed on the websites of the house wrap or window manufacturer for your project.

The addition of an insulated sheathing to the wall assembly re- duces thermal bridging. Or you can replace the rainscreen assembly that we just described with an insulated sheathing panel system that is taped at all seams (with a 50-year warranty). These types of water management systems are always employed behind masonry or stucco walls (because water penetrates those materials so rapidly) and behind wood walls, too, in rainy or marine climates.

Related Posts by Category:




7 comentarios:

Katty said...

you are right most of us almost overlooked the flashings thanks for this great info. I also recommend this one Procore

NFPA GROUP said...

Thank you for the great information!!
www.nfpagroup.com
www.nfpagroup.com/landscaping

Oleg said...

I want to share a testimony on how Le_Meridian funding service helped me with loan of 2,000,000.00 USD to finance my marijuana farm project , I'm very grateful and i promised to share this legit funding company to anyone looking for way to expand his or her business project.the company is UK/USA funding company. Anyone seeking for finance support should contact them on lfdsloans@outlook.com Or lfdsloans@lemeridianfds.com Mr Benjamin is also on whatsapp 1-989-394-3740 to make things easy for any applicant. 

Stehr Brothers said...

Really thanks for sharing this useful blog !! this post is very informative about civil construction tips. keep sharing !!

TakeOff Pro said...

Thank you for your post. This is excellent information. It is amazing and wonderful to visit your site.
It really gives me an insight on this topic.

Takeoff Pro

Coldman said...

The Better Co is a home construction company which helps you build your dream home and do your home interiors on one platform construction possible within your budget.
building construction in hyderabad

Anonymous said...

The saying "the devil is in the details" certainly applies to the topic of flashings in construction. Flashings play a crucial role in preventing water from infiltrating a home through vulnerable areas like windows, doors, porches, chimneys, and roof joints. They are often overlooked but are essential components of the building envelope that determine the long-term durability of a structure.

Properly installed flashings are designed to fit precisely at every joint, intersection, angle, seam, gap, and penetration in the exterior walls and roof. This meticulous coverage ensures that water is directed away from vulnerable areas and effectively sheds off the building. It's not only the quality of the materials used for flashings that matters but also how they are installed. Correct installation techniques are critical in ensuring that water flows away from the building, protecting it from potential damage over time.




----------------------------------------
I work in Stabilit America frp panels

Post a Comment

 
 
 

Labels